Why use wireless sensors instead of traditional data loggers?

Data loggers and Maturix™ are both based on the principle of Concrete Maturity. For the past decades, traditional data loggers have been used to collect the temperature data with thermocouple sensors.
Using data loggers is a reliable method to follow the concrete curing process but a significant amount of benefits are missed due to the lack of real-time data and the manual data collection.

How to use Data loggers for Strength Estimation

With the traditional method, the data is logged with the device and for each measurement point, you have to manually collect the log on a data medium, commonly a USB stick, plug it in a computer, read out the raw data and export it in a CSV/Excel sheet to manually analyse the logs. The temperature development and the curing time are analysed to gain the concrete maturity and insights into the concrete strength.

The challenge? You are not able to follow the curing and react proactive on challenges and to know when your concrete has finished curing.

Benefits of a Concrete Maturity System

By enabling your concrete temperature in real-time with a smart system and combining that with a data analysis solution as Maturix™, you are able not just monitor the concrete temperature in real-time, but also have PDF reports ready in real time and can display the data directly on dashboards.

Connect transmitter - white
"Using traditional data loggers was too cumbersome and time-consuming for us. Thus we only used it on the critical points of the structure. Maturix makes the monitoring very easy!"
LM Byg
Project Leader
Connection Process

Temperature is measured directly inside the concrete structure using industry-standard type K thermocouples which are connected to a Maturix™ transmitter. The transmitter measures temperature every 10 minutes and send the data wirelessly through a gateway (optional) to the cloud.

The online software calculates the concrete maturity and strength based on the principle of Concrete Maturity. The user then can access the data from a smartphone or computer in the Web Portal in real-time – with no need to be on-site!

"With data loggers, you have to be on-site and cross your fingers that the installation is good because you can't monitor the development live. Then after three days you are collect the data, plug it in the computer and pray that it was okay. Maturix is exciting because it uses real-time data. We can monitor this from the office or from the car or whatever - This saves us a lot of time!"
Marius Røksland
Quality Control, Kruse Smith

Why Maturix™?

Have a question about using Maturix™ instead of traditional data loggers?

Send us a message and we will get back to you.