The Maturix Gateway Kit includes a weather and waterproof case, NAP7, SIM-card and a back up battery. The NAP7 is a wireless communication hub that transfers data from the Maturix transmitters to the Internet. It connects to the cloud through existing LAN infrastructure, WiFi or using cellular networks.
The NAP7 establishes instant network coverage at your job site, allowing you to use Maturix at locations with no or limited Sigfox reception. This gives you continuous real-time data at any time, from anywhere.
A single gateway covers most construction sites and is capable of collecting data from all of your Maturix devices on site. The maximum signal range between gateway and transmitters is up to 700 meters, depending on the conditions*.
Readings from the transmitters are automatically collected by the NAP7, uploaded instantly, and stored in the cloud. You can view the data in the Maturix software – and receive alarms about critical temperature or strength values.
The Maturix Gateway Kit is an essential component of the Maturix system. It bridges the gap between the transmitters and the cloud in areas with no or limited Sigfox coverage.
Good coverage is required for the Maturix system to work. The gateway creates coverage where you need it!
* Learn more about the wireless signal range using the Maturix Gateway Kit…
The Type K Thermocouples are sensors that measure temperature at the cable’s tip and are intended for concrete temperature and strength monitoring. You’ll firstly have to install the thermocouple and then connect it to a Maturix transmitter, after which the temperature data will be sent continuously to the cloud.
When you purchase a gateway kit, you can book a 1-hour onboarding session with us. This session ensures you have everything you need to get started with monitoring your projects, setting you up for success from the very beginning.