FAQ – Orbit 3

Last update: 07/04/2021
Version:
You are here:
Orbit 3 5 questions
  • What is the Orbit 3?

    The Orbit 3 is an electronic device that records the ambient temperature and relative humidity and wirelessly sends it to the cloud. The temperature and humidity are measured with an accurate digital sensor located on the front of the device.

  • Where can I access the data from my Orbit 3 sensors?

    All readings can be viewed online in Sensohive App and the relevant measurements can be integrated into reports in Maturix Precast. It is currently not possible to view data from the Orbit 3 in Maturix In-situ.

  • How is the data transferred to the cloud?

    The data is sent using Sigfox. Sigfox is a wireless network designed to connect smart devices to the cloud. It benefits from longer range than Bluetooth and WiFi, and you can set up a Sigfox Gateway at your job site to create coverage – even at remote locations.

  • Do I need to be at the job site to access the data?

    No – and that is the smart thing! You can access the temperature readings from your computer or smartphone at any time, anywhere. Once you have installed the equipment, you can follow the temperature and strength development online in real-time.

  • How do I install the Orbit 3?

    Installation is quick and simple. Install the batteries, place the Orbit 3 in the silicone cover (part no. 33020), and mount the sensor using a screw or a cable tie. By default, Orbit 3 measures the temperature and humidity once every 15 minutes and transmits the data once every hour.

No questions matching current filter
Was this article helpful?
Dislike 0
Back: FAQ – Orbit K